Original Parket Castle Floor (solid) Spec Sheet

Original Parquet Castle Floor -Technical Specifications
Profile	Tongue and groove on 4 sides Microbevel at longsides (GO2)
Drawing
Thickness	20 mm
Width	140 / 160 / 180 / 218 / 240 / 260 / 280 mm A tolerance of + or - 5 mm is allowed
Length	Between 1500 and 2900 mm Max 15% can be delivered under 1500 mm
Quality	See Original Parquet Quality Descriptions
Packing	Per 4 pieces in foil
Distressing	Based on a chasting technique, a linear tumbling which damages the board on a natural way. Afterwards the tongue and groove are manually scraped to guarantee a perfect fitting.
Finishing	The finishing of the boards is based on manipulation with ammonia and or lime. With a special procedure the pores of the wood are opened and the hardwax oil is applied. Afterwards the floor is brushed and polished several times. Within 3 to 6 months after installation the colour will become approximately thirty percent lighter.
Fitting	Gluing and nailing in chipboard good, depending on underfloor Gluing in tongue and groove not possible Floating possible up to a maximum width of 180 mm
Maintenance	With Floorservice maintenance oil. The first 30 days after installation moisture has to be removed immediately.

Goodfellow Inc UK Portal