Home » European Production Wideboard » Original Parket » Range Spec Sheets

Original Parket Antico In Between (engineered square edged) spec sheet

Original Parquet Antico In Between - Technical Specifications
Profile

Tongue and groove on 4 sides
NO micro-bevel (square edged/GO0)
Drawing
Thickness 20 mm
Width 140 / 160 / 180 / 218 / 240 / 260 / 280 mm
A tolerance of + or - 5 mm is allowed
Top Layer / Wearlayer 6 mm
A tolerance of + or - 0,4 mm is allowed
Length Between 1500 and 2500 mm
Max 15% can be delivered under 1500 mm
Quality See Original Parquet Quality Descriptions
Packing  Per 4 pieces in foil
Distressing

Based on a chasting technique, a linear tumbling which damages the board on a natural way.
Afterwards the tongue and groove are manually scraped to guarantee a perfect fitting.
Finishing 

The finishing of the boards is based on manipulation with ammonia and or lime. With a special procedure the pores of the wood are opened and the hardwax oil is applied. Afterwards the floor is brushed and polished several times.
Within 3 to 6 months after installation the colour will become approximately thirty percent lighter.
Fitting  Gluing and nailing in chipboard - good, depending of underfloor
Gluing in tongue and groove - good
Floating - good
Maintenance  With Floorservice maintenance oil. The first 30 days after installation moisture has to be removed immediately.