Home » European Production Wideboard » Original Parket » Range Spec Sheets

Original Parket Antico Exclusive (solid square edged) Spec Sheet

Original Parquet Antico Exclusive -Technical Specifications
Profile

Tongue and groove on 4 sides. The 380 mm wide boards don't have t & g at the heads
NO micro-bevel (square edged/GO0)
Drawing
Thickness 25 mm
Width 230 / 240 / 250 / 260 / 270 / 290 / 380 mm
A tolerance of + or - 5 mm is allowed
Length Between 3000 and 5000 mm
Max 20% can be delivered under 3000 mm
Quality See Original Parquet Quality Descriptions
Packing  Loose packed on pallet with foil wrapped
Distressing

Based on a chasting technique, a linear tumbling which damages the board on a natural way.
Afterwards the tongue and groove are manually scraped to guarantee a perfect fitting.
Finishing 

The finishing of the boards is based on manipulation with ammonia and or lime. With a special procedure the pores of the wood are opened and the hardwax oil is applied. Afterwards the floor is brushed and polished several times.
Within 3 to 6 months after installation the colour will become approximately thirty percent lighter.
Fitting  Gluing and nailing in chipboard - good, depending of underfloor
Gluing in tongue and groove - not possible
Floating - not possible
Warning : the boards of 380 mm wide will work more then the smaller boards.
Maintenance  With Floorservice maintenance oil. The first 30 days after installation moisture has to be removed immediately.