Original Parket Cathedral Castle Floor Spec Sheet
Original Parquet Cathedral Castle Floor -Technical Specifications
|
| Profile |
Tongue and groove on 4 sides
Handcut bevel at longsides (GO2)
|
| Drawing |
 |
| Thickness |
20 mm |
| Width |
140 / 160 / 180 / 218 / 240 / 260 / 280 mm
A tolerance of + or - 5 mm is allowed |
| Length |
Between 1500 and 2900 mm
Max 15% can be delivered under 1500 mm |
| Quality |
See Original Parquet Quality Descriptions |
| Packing |
Per 4 pieces in foil |
| Distressing |
Based on scraping. In the direction of the fibres the surface become very smooth while in the opposite direction the grain is torn open. Afterwards a bevel is cut by hand.
|
| Finishing |
The finishing of the boards is based on a lye-process, also called "bleeding" of the natural acid of the wood.Afterwards the board can be impregnated to achieve the required colour. Then the floor is brushed and polished several times. Within 3 to 6 months after installation the colour will become approximately thirty percent lighter.
|
| Fitting |
Gluing and nailing in chipboard - good, depending on underfloor.
Gluing in tongue and groove - not possible.
Floating - possible up to a maximum width of 180 mm. |
| Maintenance |
With Floorservice maintenance oil. The first 30 days after installation moisture has to be removed inmediately. |
|
