Original Parket Cathedral In Between Spec Sheet

Original Parquet Cathedral In Between -Technical Specifications
Profile	Tongue and groove on 4 sides Handcut bevel at longsides (GO2)
Drawing
Thickness	20 mm
Width	140 / 180 / 240 mm A tolerance of + or - 5 mm is allowed
Top Layer (wearlayer)	6 mm A tolerance of + or - 0,4 mm is allowed
Length	Between 1500 and 2500 mm Max 15% can be delivered under 1500 mm
Quality	See Original Parquet Quality Descriptions
Packing	Per 4 pieces in foil
Distressing	Based on scraping. In the direction of the fibres the surface become very smooth while in the opposite direction the grain is torn open. Afterwards a bevel is cut by hand.
Finishing	The finishing of the boards is based on a lye-process, also called "bleeding" of the natural acid of the wood.Afterwards the board can be impregnated to achieve the required colour. Then the floor is brushed and polished several times. Within 3 to 6 months after installation the colour will become approximately thirty percent lighter.
Fitting	Gluing and nailing in chipboard - good, depending of underfloor Gluing in tongue and groove - good Floating - good
Maintenance	With Floorservice maintenance oil. The first 30 days after installation moisture has to be removed inmediately.

Goodfellow Inc UK Portal