Home » European Production Wideboard » Original Parket » Range Spec Sheets

Original Parket Tate(rough sawn) Castle Floor Spec Sheet

Original Parquet Tate Castle Floor -Technical Specifications
Profile

Tongue and groove on 4 sides
Microbevel at longsides (GO2)
Drawing
Thickness 20 mm
Width 140 / 160 / 180 / 218 / 240 / 260 / 280 mm
A tolerance of + or - 5 mm is allowed
Length Between 1500 and 2900 mm
Max 15% can be delivered under 1500 mm
Quality See Original Parquet Quality Descriptions
Packing  Per 4 pieces in foil
Distressing

Based on sawing and brushing. As result the floor looks extremely rough with it's own character.
Finishing 

The finishing of the boards is based on manipulation with ammonia and or lime. With a special procedure the pores of the wood are opened and the hardwaxoil is applied. Afterwards the floor is brushed and polished several times. Within 3 to 6 months after installation the colour will become approximately thirty percent lighter.
Fitting  Gluing and nailing in chipboard - good, depending of underfloor
Gluing in tongue and groove - not possible
Floating - possible up to a maximum width of 180 mm
Maintenance  With Floorservice maintenance oil. The first 30 days after installation moisture has to be removed inmediately.